Filter
Top Products
22
5.) Press the OPEN/CLOSE button to close the CD door. Do not close the door
by hand. Each of the discs will
spin momentarily and then the
system will read the first disc and
the display will show the total
tracks and playing time of the first
disc.
6.) Press the PLAY/PAUSE button on the front panel or remote control to
begin playback on the first disc. If you loaded more than one disc in the player
you may also press the CD1, CD2, or CD3 buttons on the front panel or remote
control to begin playback on any of the discs in the player. Playback will begin
on Track 1 and continue until the end of the disc. The display will show the
elapsed playing time of each track as it plays. If there is more than one disc in
the player, playback will continue until all tracks on all discs have been played,
then the player will stop and the display will show the total tracks and playing
time on the last disc.
7.) To stop playback at any time press the STOP button on the front panel or
remote control. Playback stops and the display will show the total tracks and
playing time on the disc that was playing.
Removing Discs From The Player
When you are finished listening press the STOP
< button to stop playback if necessary and then
press the OPEN/CLOSE button to open the CD
door. Place your finger in the cut-out at the edge
of each CD compartment and gently lift the disc
off the spindle.
CD
DISC
1
TOTAL
MS3103_ib012803.p65 28/1/2003, 11:3622