Emerson ES830 Stereo System User Manual


 
4
PREPARATION FOR USE
Unpacking and Set Up
This carton contains the main unit, two speakers, and a remote control handset.
Carefully remove all the components from the carton and remove all packing
materials form the components. Make sure nothing is accidentally discarded
with the packing materials.
Save the carton and packing materials, if possible, in the unlikely event that
this unit ever needs to be returned for service. Using the original carton and
packing material is the only way to properly protect the unit from shipping
damage.
Remove any descriptive stickers or labels from the front panel of the main unit.
Do not remove any labels or stickers that may be affixed to the back panel of
the main unit or the speakers.
This system was shipped with a dummy CDtransit protection card in CD
player. The card was inserted to prevent the CD player mechanisms from
moving during shipping and handling. It must be removed and discarded before
you can load your own CD. Press the OPEN/CLOSE position to open the
CD door. Remove the dummy CDand discard it. Then press the OPEN/
CLOSE position again to close the CD door.
Unwind the AC power cord on the back of the main unit and extend it to its full
length.
Unwind the FM lead wire antenna on the back of the main unit and extend it to
its full length.
Unwind the speaker cables on the backs of the speakers and extend them to
their full length.
ES830_012005.p65 20/1/2005, 11:154