Filter
Top Products
4
PREPARATION FOR USE
UNPACKING AND SET UP
• This system consists of the following components:
1.) Tuner/Amp/CD Player (main unit),
2.) 2 Sound Cylinder Speakers,
3.) Powered Subwoofer unit, subwoofer connection cable, and Remote
Control.
Carefully remove all the components from the display carton and verify that
you have all the necessary components before you dispose of the display
carton.
• Remove all packing materials from the individual components. Remove any
descriptive labels that may be attached to the front panel of the main unit. Do
not remove any labels or stickers on the back panels of the main unit or the
speakers.
• Remove any small strips of tape that may have been used to prevent the CD
door from opening in transit.
• Place all the components in the desired location. This system is designed to
be used on level, stable, flat surface such as a table, desk, shelf, or stand,
convenient to an AC outlet, out of direct sunlight, and away from sources of
excess heat, dust, moisture, or vibration.
• Unwind the AC power cords on the main unit and the subwoofer and extend
the cords to their full length.
• Unwind the lead wire FM antenna on the back of the main unit and extend it to
its full length.
ES3_ib032103.p65 21/3/2003, 10:314