Filter
Top Products
21
LISTENING TO THE RADIO
1.) Press the POWER/STANDBY button on the main unit or the remote control.
The main display turns on.
2.) If necessary, press the TUNER/BAND button
on the top panel of the main unit or the remote
control to select the Tuner function. The display
will show an AM or FM station frequency. To
select a different band, press the TUNER/BAND button again.
3.) Tune to the desired frequency as follows:
• Manual Tuning
Repeatedly press the TUNING/SKIP-SEARCH UP or DOWN buttons
on the top panel of the main unit or on the remote control until the frequency of
the desired station appears on the display.
• Automatic Tuning
Press and hold the TUNING/SKIP-SEARCH UP or DOWN buttons on
the top panel of the main unit or on the remote control until the display begins
to move, then release the buttons. The tuner will search up or down the band
for the next strong station and stop on that station. Repeat this procedure until
the tuner stops on your desired station.
4.) Adjust the VOLUME and BASS BOOST controls as desired. Also adjust the
BASS VOLUME level control on the front panel of the subwoofer
5.) If you tuned to an FM Stereo station the STEREO indicator will appear in the
main display. If the reception is noisy or weak, press the FM ST/MONO button
on the top panel or the STEREO/MONO button on the remote control to select
FM Mono mode. The STEREO indicator will disappear. The reception will
normally improve although the sound will no longer be in stereo.
6.) When you are finished listening press the POWER/STANDBY button on the
main unit or remote control to return to the Standby (Power Off) mode. The
main display goes off and the time display reappears.
ES3_ib032103.p65 21/3/2003, 10:3121