Filter
Top Products
30
PROGRAMMED PLAYBACK
This system has a 16 track programmable memory. You can program up to 16
tracks on a disc to play back in any desired order.
Note: You cannot program the player while a disc is playing. You must press the
STOP button first to stop playback before beginning the programming steps
below.
1.) Load your disc as usual and wait until the display shows the total playing time
and number of tracks.
2.) Press the MEMORY/CLOCK SET button
on the front panel or the remote control.
The display changes to the Programming
mode and appears as follows:
3.) Press the SKIP/SEARCH controls ( /
) on the top panel of the main unit or
the remote control to select the first track
you wish to program.
Example: Track 7.
4.) Press the MEMORY/CLOCK SET button
again to enter Track 7 in Program Memory
01. The Program number advances to 02
and the track display again shows “- -”.
5.) Repeat Steps 3 and 4, selecting a different track number each time until you
have entered up to 16 tracks in the memory.
ES3_ib032103.p65 21/3/2003, 10:3130