Filter
Top Products
December 2014
18
Quick Start Guide
Field Communicator or AMS
To view or change the diameter, maximum
height, or power factor:
1. From the Home screen, select
2: Configure.
2. Select
2: Manual Setup.
3. Select
3: Profiling.
4. Select
5: Non-Linear Profile Height P014 or
5:Power Factor P014, depending on the
Non-Linear Profile selected.
5. Input a new value, and press “
ENTER” to save it.
6. Press “
SEND” to update the transmitter.
Rosemount 3490 Series Control Unit
To view or change the diameter, maximum
height, or power factor:
1. From the Main Menu screen, select
SETUP.
2. Select the transmitter (e.g. “
Tx1: 3107”).
3. Select
DUTY.
4. Select
Profile Height.
5. Follow the on-screen instructions to edit and save the new setting.
(Press the
Enter ( ) key if prompted to change the mode to “off-line”).
6. Select “
Quit” to exit to the previous menu.
Note
Some flow profiles automatically populate this parameter, and do not allow
editing.
Non-Linear Profile Height P014
1 ft
1
ESC
DEL ENTER
HELP
w
s
q
a
z
Lock
Shift
@ &
á ü
x
e
d
c
r
f
v
t
g
b
y
h
n
u
j
m
*
-
+
/
.
0
7
4
1
8
5
2
9
6
3
i
k
o
l
FN
(Field Communicator screen)
Profile Height P014
1.0000ft
Esc=Quit =Edit
(Rosemount 3491 screen)