EAW DSA250 & DSA230 Speaker User Manual


 
5.5.4 INSTALLATION OPTIONS
Normal Method: This method is for installing DSA loudspeakers
flush-mounted to a vertical wall surface using the supplied brackets. The
installation instructions herein apply to this installation method.
Optional Normal Method: This method is for suspending DSA
loudspeakers. The optional DSA Fly-Bar Kit is required for suspension. For
suspending more than one loudspeaker from a single Fly-Bar, the
optional Enclosure Connecting Kit is also required. These accessories are
supplied with complete instructions for their use.
Alternate Methods: In some applications, the DSA loudspeakers may
require suspension or other methods of installation. Please contact EAW
for assistance when the normal method cannot be used. (See Section 7.3)
Orient each enclosure in the cluster as shown in the DSAPilot diagrams
according to the location of the Signal End with the LED.
5.5.5 ANGLING ENCLOSURES
1. Vertical Angle: Normally, the DSA Series enclosures are designed to
be mounted flat to a vertical surface.
2. Horizontal Angle Single Loudspeakers: When mounted flat to a
vertical surface, the mounting hardware allows the enclosures to be
rotated up to +/-15° degrees horizontally, 0° being perpendicular to
the wall surface. This allows directing its fixed 120° horizontal
coverage anywhere within a 150° arc around the front of theloudspeaker.
3. Horizontal Angle Over/Under Loudspeakers: Always align over/under
enclosures so they are aimed in the same direction.
4. Horizontal Angle Side-by-Side Loudspeakers: These clusters cannot
be rotated horizontally. Always position the DSA250 and DSA230
loudspeakers for these clusters so that their aiming axes are
perpendicular to the mounting surface.
24
0°
WALL
15°
15°
Figure 5.5.5a Horizontal Rotation
Single Enclosure
WALL
SUPPLIED
WALL
BRACKETS
DSA
Figure 5.5.4a Wall Mounted
USER-SUPPLIED
SUSPENSION
HARDWARE
OPTIONAL
FLY-BAR KIT
OPTIONAL
ENCLOSURE
CONNECTING
KIT
DSA
DSA
Figure 5.5.4b Suspended