Filter
Top Products
5.5.3 MULTIPLE LOUDSPEAKERS AND CLUSTER CONFIGURATIONS
CAUTION: Only clusters defined by the DSAPilot or pictured herein may
be used. Any other configurations will result in poor to unusable perform-
ance. In the future other configurations may be added to the DSAPilot.
In some applications, tighter MF/HF pattern control, higher output, or
narrower vertical coverage may be desirable. Where higher LF output
capability is desired, height restrictions may not permit the ideal over-
under mounting of the DSA250 and DSA230 models. Because of these
and other possible requirements, the DSAPilot allows several cluster
configurations to be used in a single or in multiple locations to
achieve various coverage and output results. See the DSA Application
Guide for details.
NOTE: Where aesthetics or other
considerations warrant, side-by-side
configurations can be mirrored
without affecting the results.
23
1A
1B
1C
2A
2B
2C
2D
2G
2F
3A
2E
Figure 5.5.3 DSA Cluster Configurations