Filter
Top Products
Introduction
Please take a moment to fill out and mail the
Earthquake Warranty Registration card. Also read the
serial number located on the control panel and record
it here:
Unpacking
Your Earthquake subwoofer should reach you
in perfect condition. If you do notice any shipping
damage, please contact your Earthquake dealer
immediately.
Gently lift out the unit and remove all the
packing material. It is important. It is important to save
all the packing materials and the box in case your
subwoofer ever needs to be moved or shipped for
repair.
Make sure that you keep your sales receipt. It
s the only way to establish the duration of you Limited
Warranty and it may be useful for insurance purposes.
Dear Valued Customer,
Welcome to the electric world of Earthquake
High Fidelity sound systems; you are about to
experience the MiniMe subwoofer. This system is
designed to dramatically enhance your enjoyment of
music and films at home, by adding power and
impact to low frequency sound effects, without taking
up your entire living space.
Earthquake Sound Corporation is located in
the heart of the Silicon Valley. It specializes in
manufacturing high end Home and Mobile audio
products ranging from the smallest driver to the loudest
subwoofer systems. In its dedication to excellence,
Earthquake has maintained extensive programs in
research and development to provide you with the
highest quality audio products made.
Features
• Elegant 7-layer piano black lacquer finish
This owners manual is designed to better
acquaint you with the MiniMe subwoofer system, and
• Built in 450-Watt, high efficiency, Class "D" amplifier
to guide you through the phases of system design and
application. It is imperative that you read this manual in
• Extremely low distortion
its entirety. EARTHQUAKE technicians and staff are
looking forward to answer any questions you might
• Long throw, premium quality drivers
have, please call (1-800-576-7944).
• Convenient compact size
• Automatic signal-sensing turn-on and stand-by mode
• Volume control
• Operation status LEDs
• 50Hz - 160Hz Freq. adjustment
• 0 - 180 Phase Shift adjustment
• High Level inputs
• Bypassed High Level outputs
• 220V - 110V selectable
Care
To maintain the speaker cabinet's finish, first
unplug the power cord and then use a soft, slightly
dampened cloth to clean the surfaces and finish off
with a dry cloth.
To keep the large rubber surrounds soft and
supple for 20-years or more, treat them with mink oil,
available ta most shoe repair stores. Rub a generous
amount into the surrounds with a soft cloth about once
a year (more often if you line in a dry climate).
Serial Number:
Purchased From:
Date:
Earthquake • MiniMe User Manual
4