Filter
Top Products
! It is recommended that the Cin
equipment be plugged into a dedicated 20-amp circuit with an
isolated ground.
! Disconnect all live power cords before making connections to the
remote gain.
! Keep all power cords away from all signal cables to prevent
humming from induced noise.
! Choose reliable signal cables cords (Earthquake Sound also
specializes in high-performance RCA cables and patches).
! All speaker wires that are ran through the walls should be twisted
type to reduce potential hum noise pick up.
! Label both ends of all wires with the corresponding room
location.
! It is best to use a grounded electrical outlet to power the
amplifier. Lack of input ground reference could be unsafe.
Consult with your electrical contractor about proper grounding.
énova-IR16 and the source
Unpacking
7
Unpacking system components
• 1 Power cord
• 8 Remote controls
• 8 Keypads (wallplates not included)
• 8 Phoenix speaker terminals
• 8 Phoenix pad connectors
• 1 16-channel Amplifier
Cinénova- 16 included componentsIR
There are several factors to consider before installing the Earthquake
Sound Cinénova-IR16 system.
• What are the intended listening zones?
• What system options and accessories might be required for
features such as local sources, etc.?
• From where in each zone will the listener prefer to control the
system? Where will the remote gains be located? Where will the
speakers be located?
• Where will the source equipment be located?
Note: The Cinénova-IR16 must have adequate ventilation above and
below for air circulation and heat dissipation. In addition, rack mount
locations may require fans and vents.
System installation considerations
Connection tips
! Keep the original carton and packing materials for future
shipment or storage.
! Check for any visual signs of damage. If you encounter any
concealed damage, consult your Earthquake Sound dealer
before proceeding with unit installation.
! Retain the sales receipt as it established the duration of the
limited warranty and provided information for insurance
purposes.
Cin ova-IR16 Power Amplifierén