Filter
Top Products
rCM-810
43
RCM-810
DIGITAL CONTROLLER MODULE
The RCM-810 remote control
module is a digital controller
module for PA and fixed installation
and permits the integration of
DSA amplifiers in a remote control
network with up to 250 devices.
With it, a complete PA system can
be controlled and supervised from
one or several PCs with the help
of IRIS-Net software. Data on all
operating states – e.g. switch-on
status, temperature, response
of protective circuits, load im-
pedance etc. – is collected and
displayed centrally in IRIS-Net.
This makes it possible to react
with targeted intervention should
critical operating states ever occur.
It is also possible to program an
automatic reaction in the event
of certain threshold limits being
under- or overstepped. All parame-
ters (e.g. Power On/Off, Mute etc.)
can be controlled in real time and
saved in the amplifier. Independently
of network control, all the settings
are saved in the event of a break-
down. The RCM-810 also offers a
Control Port with freely programmable
control inputs and outputs.
Switches can be connected to the
control inputs (GPIs). Within IRIS-Net,
you can program any desired logic
functions for the inputs.
External elements can be connected
to the control outputs (GPOs) in
order, for example, to signal particular
states. As a consequence, an amplifier
equipped with an RCM-810 module
satisfies the highest safety require-
ments.
German engineering. Manufactured
in accordance with the Bosch
Production System (BPS) in Straubing,
Germany