Filter
Top Products
2
Ω
: 500W
/2
Ω
,
VLD
OU
TP
UT
4
Ω
: 500W/4
Ω
,
250W/
8
Ω
7
0V : 500W
/
1
0
Ω
1
00V : 500W/20Ω
dsa se ri es - Mu l t i -CH a n n e l
DSA Series - Multi-Channel
CAN DRIVE ANY LOAD BETWEEN 2 AND 10 OHMS WITH THEIR RATED
MAXIMUM OUTPUTS OF 500 W AND 1000 W RESPECTIVELY PER CHANNEL
OR DIRECTLY DRIVE 70 V
RMS OR 100 VRMS LOUDSPEAKER LINES.
40
Innovative DYNACORD technology,
exemplary flexibility, very high
output with an extremely good
efficiency and integration into
IRIS-Net networks: a thumbnail
sketch of the DSA multi-channel
power amplifiers that provide a
multitude of solutions to the
problems posed by fixed installa-
tions.
German engineering. Manufactured
in accordance with the Bosch
Production System (BPS) in Straubing,
Germany.
The multi-channel DSA 8405 / 8410 /
8805 power amplifiers are a miles-
tone in the design and production of
high-powered power amplifiers. The
unique combination of Class D power
amplifier blocks and synchronized
switching power supplies offers to
this date unmatched power density
combined with excellent audio per-
formance.
UNIQUE FLEXIBILITY
THROUGH VLD
The ability to switch individually
the mode of each power amp chan-
nel helps the DSA multi-channel
power amplifiers to achieve a de-
gree of flexibility never before pos-
sible. In low impedance operation
(2 Ω, 4 Ω, 8 Ω), each channel can
drive up to four 8-ohm loudspeaker
cabinets. The output channels can
also be paired in bridged mode.