Filter
Top Products
SPECIFICATIONS
Nominal Power Ratings
MODEL
4ohm STEREO 2ohm STEREO 4ohm MONO
A600/4 4 X 50 4 X 75 2 X 150
A1200/4 4 X 100 4 X 150 2 X 300
General Specifications
Frequency Response 20Hz - 20kHz
Power Bandwidth 10Hz - 50 kHz
Total Harmonic Distortion + N <0.05%
Input Topology Instrumentation
Input Sensitivity 150mV - 12 Volts RMS
(with -12dB pad)
Input Impedance 40 kOhms
Load Impedance (stereo) 2 - 8 Ohms
Load Impedance (bridged) 4 - 8 Ohms
Supply Voltage 9 - 16 Volts
Damping Factor >150
Slew Rate >20V/µs
QBASS
TM
Up to +18dB @ 40Hz
QBASS PLUS
TM
Up to +18dB Boost
@30, 36, 44, or 60Hz
Crossovers 12dB/Octave
Crossover Frequency 30-4kHz
Idle Current: A600/4 1.0 Amps
A1200/4 1.8 Amps
Dimensions
Length Width Height
A600/4 21-½” 10-½” 2-¾”
A1200/4 24-¾” 10-½” 2-¾”
4