Filter
Top Products
Getting Started Connections Playback Information Troubleshooting
ENGLISH
Setup
Normally there is no need to use this function, aside from the cases
described below.
• The Firmware Update function is only used for updating the firmware
via the Internet, for example for the purpose of adding functions to
the S-32 in the future.
• Information regarding the Firmware Update function will be
announced on the DENON web site each time related plans are
defined.
• A broadband connection to the Internet is required to use this
function (v page 9).
• Even with a broadband connection to the Internet, approximately
30 minutes is required for the updating procedure to be completed.
Once updating starts, normal operations on the S-32 cannot be
performed until updating is completed.
Furthermore, updating the firmware may reset the backup data for
the parameters, etc., set for the S-32.
d
Firmware Update
Update the firmware.
NOTE
• Connection to the network and specific settings are required to
update the firmware. For details, see page 6, 9.
• Do not turn off the power until updating is completed.
Other
Make setting for computer language environment.
n PC Language
Select computer environment language.
[Selectable items] ara
chi (smpl)
chi (trad)
cze
dan
dut
eng
fin
fre
ger
gre
heb
hun
ita
jpn
kor
nor
pol
por
por (BR)
rus
spa
swe
tur
Network Information
Display network information.
[Items to be checked] Wired or Wireless
SSID
DHCP= On or Off
IP Address
MAC Address
n Default Language
Select the language you want to display Internet Radio
information.
[Selectable items]
English
German
French
Italian
Spanish
Nederlandish
Swedish