Filter
Top Products
Getting Started Setup Playback Information Troubleshooting
ENGLISH
AM loop antenna assembly
Remove the vinyl tie and take out the connection
line.
Connect to the AM antenna terminals.
Bend in the reverse direction.
a. With the antenna on top any stable
surface.
Mount
b. With the antenna attached to a wall.
Installation hole Mount on wall, etc.
Connection of AM antennas
1. Push the
lever.
2. Insert the
conductor.
3. Return the
lever.
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
• Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.
Use connected to a subwoofer.
46#800'&3
*/
Subwoofer
Connection to a Subwoofer
NOTE
When turning the power ON/OFF:
ON: First turn on the power to the main unit, then turn on the power
to the subwoofer.
OFF: First turn off the power to the subwoofer, then turn off the power
to the main unit.
Connections
[Wired LAN]
Network Audio
To WAN side
Internet radio
Router
Computer
To LAN port
To LAN port
LAN port/
Ethernet port
Modem
[Wireless LAN]
To WAN side
Internet radio
Modem
Computer
Wireless LAN rod
antenna (Supplied)
Turn rightRouter with access point