Filter
Top Products
Getting Started Connections Setup Setting the Timer Other Functions Troubleshooting
ENGLISH
Specifications
Press [DIMMER].
b The display’s brightness switches each time the button is
pressed.
SDB
: Switches Super Dynamic Bass on and off.
BASS
: Adjusts the bass sound.
[Variable range]
–10dB
~
+10dB
TREBLE
: Adjusts the treble sound.
[Variable range]
–10dB
~
+10dB
S.DIRECT
: Turns SDB, bass and treble off.
Settings made upon purchase :
• SDB ·····················OFF • TREBLE ················ 0 dB
• BASS ·················· 0 dB • S. DIRECT ·············OFF
100 %
[Variable range]
VOLUME 00 ~ 45, VOLUME MAX
Press SOURCE to select the input source.
AUX1
(AUX1/Dock)
USB
TUNERCD
PORTABLE IN AUX2
b “AUX1/Dock” is displayed when a Control Dock for iPod is
connected to “AUX1”.
b “PORTABLE IN” is only displayed when connected.
Plug the headphones (sold separately) into the <PHONES>.
b
The sound from the speakers is automatically cut off.
In the stop mode, press <5> to open the disc tray.
b “Loading discs” (vpage 3).
Adjusting the Master Volume
n To close the disc tray
Press <5> again.
b The disc tray also closes when <1/3>, [CD 1/3] or SOURCE is
pressed.
NOTE
Do not place any foreign objects in the disc tray. Doing so could
damage it.
Either turn <VOLUME> or press [VOLUME df].
The volume level is displayed.
Input Source Switching
1
Select the item to be adjusted with SDB/TONE.
BASS
TREBLE
S.DIRECT
SDB
GAbout the displayH
When the SDB is on ∙∙∙∙∙∙∙∙∙∙∙∙“SDB” is displayed.
When BASS or TREBLE is set to something other than 0 dB
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ “TONE” is displayed.
2
Display the mode you want to adjust, then use 8,
9 and [o p] to turn on or off and to adjust the
tone.
b If no operation is performed for 5 seconds, the adjustment is
retained and the normal display reappears.
NOTE
Be careful not to set the volume too high when using headphones.
Adjusting the Tone
Turning the Sound Off Temporarily
(Muting)
Press [MUTE].
The “MUTE ON” is displayed.
Loading Discs
Listening with Headphones
[Selectable modes]
To cancel, press [MUTE] again.
(The mute mode is also canceled when the <VOLUME> control is
turned or a [VOLUME df] is pressed.)
Switching the Display’s Brightness
70 % 40 %
OFF
Playback
Turning the Power On
NOTE
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time or when traveling, either press ON/STANDBY to turn
off the power, or unplug the power cord from the power outlet.
• Be sure to stop playback before turning the power off.
Press ON/STANDBY.
• The power turns on. Press again to set the power to standby.
• Power indicator
Standby ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Red
Power on ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Green
When the timer is set ∙∙∙∙∙∙∙∙∙∙∙∙Orange
n Completely turning off the power
Unplug the power cord from the wall outlet.
b Note that the time setting is cleared when the power cord is
unplugged from the outlet.
b The settings made for the various functions may be cleared if the
power cord is left unplugged from a power outlet for an extended
period of time.
Preparations
Playback
Operations Possible During
Playback