Denon DVM-2845CI CD Player User Manual


 
22
EN
Press the A-B REPEAT button
at your chosen starting point.
A- appears briefly on the
TV screen.
Press the A-B REPEAT button
again at your chosen end point.
A-B appears briefly on the
TV screen, and the repeat
sequence begins.
To exit the sequence, press
the A-B REPEAT button.
NOTES:
The A-B Repeat section can only be set within the cur-
rent title (for DVD-Video), or current track (for DVD-Audio,
Audio CD, Super Audio CD, Video CD and with DivX
®
files).
A-B Repeat is not available with some scenes on DVD.
•To cancel the A point which was set, press the CLEAR
button.
A-B Repeat playback does not function during title,
chapter, track, group, disc or 5 disc repeat playback.
•For some DivX
®
files, A-B Repeat playback may not
function.
3
2
1
DISC PLAYBACK
A-B REPEAT
DivX
®
Super
Audio CD
CDVCDDVD-ADVD-V
A -
A - B
OFF
Program Playback
To activate Repeat function, press the REPEAT button during
playback.
The repeat mode changes as described below every time
you press the button.
Super
Audio CD
CDVCD
REPEAT TRACK / GROUP / DISC
NOTES:
In the track repeat, the repeat setting will be cleared
when moving to other track.
Repeat playback does not function during A-B repeat
playback.
•You cannot set up to the 5 Disc Repeat in Video CD.
DivX
®
WMAJPEGMP3DVD-A
NOTES:
In the track or group repeat, the repeat setting will be
cleared when moving to other track or group.
•You cannot set up to the 5 Disc Repeat in DivX
®
.
This function allows you to program a playback order of
DVD-Audio, Audio CD, Super Audio CD, MP3, JPEG, or
WMA in a desired sequence.
In stop mode, press the MODE
button repeatedly until the pro-
gram screen appears.
•The group selection screen will
appear.
Press the Cursor buttons
(
or ) to select a group, then press the ENTER
button.
The track selection screen will be displayed.
•It takes approximately five seconds until the track
selection screen appears.
Press the Cursor buttons (or ) to select a
track, then press the
ENTER button.
Press the Cursor button (s) to go back to the group
selection screen from the track selection screen.
Press the PLAY button to play back the pro-
grammed tracks.
4
3
2
1
DVD-A
DVD-AUDIO TOTAL 0:00:00
PROGRAM
1 1:02:25
G
G
G
2 1:03:30
ALL CLEAR
1 1:02:25
1/1
1/1
OFF
(repeat off)
TRACK DISC
(current track repeat) (entire disc repeat)
5 Disc Repeat
TRACK DISC
(current track
repeat)
(
entire disc
repeat)
GROUP
(current folder
repeat)
OFF
(repeat off)
5 Disc Repeat
You may determine the order in which
tracks will play.
In stop mode press the MODE
button.
The PROGRAM screen will
appear.
1
Super
Audio CD
CD
Press the Cursor buttons (or ) to select a
disc, then press the
ENTER button.
Press the CLEAR button to erase the most recently
entered program.
Press the Cursor buttons
(
or ) to select a track, then
press the
ENTER button.
Press the CLEAR button to erase
the most recently entered pro-
gram.
Press the PLAY button to start programmed play-
back.
NOTE:
•DVD-Audio, DVD-Video, MP3, JPEG and WMA discs will
display in gray when “PROGRAM [5DISC]” screen
appears.
4
3
2
CD-DA
PROGRAM
1
2
3
4
5
6
7
1
1
1/2
1/1
T
T
T
T
T
T
T
T
T
DISC
PROGRAM
CD-DA
CD-DA
CD-DA
DVD
ALL CLEAR
CD-DA
1/ 1
PBC OFF
E8700UD(EN).qx4 06.12.26 18:14 Page 22