Filter
Top Products
17
ENGLISH
r
Playing a certain section repeatedly ……………………………………………………………………………
A-B Repeat
t
Playing the tracks in a certain order ………………………………………………………………
Programmed Playback
Example: Using a CD containing 15 tracks
1st press2nd press3rd press4th press
(1) When pressed during playback:
The single-track repeat mode is set and “REPEAT” and
“ ” light.
ONE
REPEAT
ONE
12 34 56 78 910 1112131415
(1) When pressed during playback:
The all-track repeat mode is set and “REPEAT” and “ ”
light.
ALL
REPEAT
12 34 56 78 910 1112131415
ALL
(2) When pressed before playback:
The all-track repeat mode is set and “REPEAT” and “ ”
light.
Then press the play button (
1) or direct search buttons on
the remote control unit to play.
ALL
ALL
REPEAT
12 34 56 78 910 1112131415
When pressed during playback:
“REPEAT” and “ ” light.
A /
REPEAT
A
When pressed during playback:
Press the REPEAT button again to return to normal playback.
“REPEAT” and “ ” light, and the section between
points A and B is played repeatedly.
A / B
REPEAT
AB
(2) When pressed before playback: The single-track repeat mode is set and “REPEAT” and
“ ” light.
Next,
q Press the play button (
1) to play the first track
repeatedly.
w If playback is started using the direct search buttons on
the remote control unit or the
7/9 and 8/6
buttons on the CD player, the specified track is played
repeatedly.
ONE
REPEAT
ONE
12 34 56 78 910 1112131415
(Using the remote control unit)
Example: Programming the 3rd track to play first, the 18th track to play second, using a CD containing 18 tracks
and with a playing time of 62 minutes, 03 seconds
Procedure
1
Press the PROGRAM button.
2
Press “3” to set the 3rd track at
the first place in the program.
3
Press “+10” and “8” to set the
18th track at the second place in
the program.
4
Press the play button (1).
POWER
SLEEP
EDIT
RANDOM REPEAT
RESET
REC / MUTE
TIME
SIDE A/B
PROGRAMCANCEL DIRECT FUNCTION
1 2 3 4 5
6 7 8 9 10
PRESET
TUNING
MEMO
BAND
VOLUME
+10
89
8
9
2
2
1
2
1
6
7
6
7
01
B
REMOTE CONTROL UNIT RC-829
DECK
TUNER
CD
MD
TUNER
r
q
w
e
PROGRAM
PROGRAM
3
After 2 seconds
display when the 3rd track is set at the
first place
3
PROGRAM
After 2 seconds
display when the 18th track is set at the
second place
The tracks are played in the
programmed order.
• When the TIME/SIDE A/B button is pressed before playback, the total playback time of programmed tracks is displayed.
• Press the DIRECT button to resume normal playback during the programmed playback.
• To cancel the entire program, press the DIRECT button or cancel the program one by one using the CANCEL button.
• If you want to correct the programmed track, press the automatic/manual search reverse button (
8/6) to display
the track to correct and press the desired number button on the remote control unit. Press the CANCEL button instead
of the number button to cancel the displayed track. After finishing the correction, press the automatic/manual forward
button (
7/9) repeatedly until “– –” is displayed on the track number display.
Other operations possible during programmed playback:
Such operations as quick search, pause and skip monitor are also possible during programmed playback.
For the quick search function, press the automatic/manual search reverse button (
8/6) to move back to the
beginning of the track, then press it again while the time display reads “ ” to move back to the beginning of the
preceding track.
To move ahead to the beginning of the next track, press the automatic/manual search forward button (
7/9),
regardless of the time display.
• The numbers of the programmed tracks on the music calendar turn off after the tracks have been played.
• With this CD player, up to 20 tracks with any track number between 1 and 99 can be programmed.
• If a number greater than the total number of tracks on the disc is specified, that number will not be displayed.
• Programming is also possible with the disc tray open. In this case it is possible to program a track number not
included on the disc, but when the program is played, that track number will be skipped.
• The entire program is cancelled when the OPEN/CLOSE button (
5) is pressed.
• If you make a mistake when programming, press the CANCEL button to cancel the mistake. (The last track in the
program is cancelled each time the CANCEL button is pressed.)
• The A-B repeat functions do not work during programmed playback.
• Set the stop mode when cancelling tracks from the program.
NOTES: