Denon DRA-295 Stereo Receiver User Manual


 
21
ENGLISH
Audio section
(Power amplifier)
Rated output: 50 W + 50 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
Output terminals: A or B 14 to 16 /ohms
A+B 18 to 16 /ohms
(Analog)
LINE input PRE OUT
Input sensitivity/input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 50 kHz: ±1.5 dB
S/N ratio: 98 dB (IHF-A weighted)
Total harmonic distortion: 0.009 % (-3 dB at rated output,8 /ohms) (1 kHz)
Rated output: 1.2 V
Video section
(standard video jacks)
Input/output level and impedance: 1 V p-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +1, -3 dB
Tuner section
[FM] (note:
µ
V at 75
/ohms, 0 dBf = 1 x 10
-15
W) [AM]
Receiving range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz
Usable sensitivity: 1.4 µV (14.2 dBf) 18 µV
50 dB quieting sensitivity: MONO 2.8
µ
V (20.2 dBf)
STEREO 23
µ
V (38.5 dBf)
S/N ratio: MONO 80 dB (IHF-A weighted)
STEREO 75 dB (IHF-A weighted)
Total harmonic distortion: MONO 0.15 % (1kHz)
STEREO 0.3 % (1kHz)
General
Power supply: AC 120 V, 60 Hz
Power consumption: 3.0 A
Maximum external dimensions: 434 (W) x 147 (H) x 417 (D) mm (17-3/32 x 5-25/32 x 16-27/64)
Weight: 9.2 kg (20 lbs 4.5 oz)
Remote control unit (RC-895)
Batteries: R6P/AA Type (two batteries)
External dimensions: 50 (W) x 179 (H) x 22 (D) mm (1-31/32 x 7-3/64 x 55/64)
Weight: 125 g (Approx. 7.5 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
12
SPECIFICATIONS