Filter
Top Products
18
ENGLISH
(2) Preset change procedure
★ The preset procedure can be performed in the cue, pause mode, when no disc is loaded or when the disc trays is open.
1
2
Set the preset operation selection mode.
Press the PRESET button.
Select the preset item.
Turn the Track Select knob (8—9).
✽ The first preset item displayed is the last preset item
displayed the last time the presettings were mode.
PUSH ENTER
Turn the knob clock-
wise to move in the
direction of the
arrows, counterclock-
wise to move in the
opposite direction.
3
4
Change the setting.
Press the Track Select knob (8—9).
• When the Track Select knob (8—9) is turned, the
player returns to the same status as in step 2.
Cancel the preset mode.
Press the PRESET or PLAY/PAUSE or CUE button.
NOTE:
• If the message shown below appears, there is a problem
with the preset memory. Contact a Denon authorized
service station.
9
PRESET FUNCTIONS AND OPERATIONS
(1) Preset functions
★ Use these functions to preset the DN-2100F’s operation modes. These presets are stored in permanent memory, so they are not cleared even
when the power is turned off.
★ The functions shown on page 19 can be adjusted to your preference. Set these functions according to your needs for more efficient operation.