Filter
Top Products
17
ENGLISH
8
OTHER FUNCTIONS
1. Relay play
(1) Single relay mode
1
Press the CONT./SINGLE button several times until
“SINGLE” and “RELAY” indicator are lit on the display.
• When the play finish the desired track, another CD will be
started the play.
• When both CD1 and CD2 set to the SINGLE RELAY
mode, endless play are available to the each track of CD1
and CD2 alternately.
(2) Continuous relay mode
1
Press the CONT./SINGLE button several times until
“CONTINUOUS” and “RELAY” indicator are lit on the
display.
• When the play finish the final track of disc, another CD
will be started the play.
• When both CD1 and CD2 set to the CONTINUOUS
RELAY mode, endless play are available to the each disc
of CD1 and CD2 alternately.
(3) Combined with single, continuous, single relay
and continuous relay mode
1
The combination with RELAY PLAY mode and SINGLE,
CONTINUOUS PLAY mode, or SINGLE RELAY and
CONTINUOUS RELAY PLAY mode are also available.
For example:
When CD1 is set to the CONTINUOUS RELAY PLAY mode
and CD2 is set to the CONTINUOUS PLAY mode.
• When start the play from CD1, play can be stopped after
play the final track of CD2.
★ The unit can play CD1 and CD2 alternately.
★ The relay mode can be selected in the preset mode. (Preset item
3)
2. Repeat play
(1) Single repeat mode
1
In the single mode, the single repeat play mode is set when
the CONT./SINGLE button is pressed for over 1 second.
• Repeat playback is performed in units of tracks.
(2) Continuous repeat mode
1
In the continuous play mode, the continuous repeat play
mode is set when the CONT./SINGLE button is pressed for
over 1 second.
• Repeat playback is performed in units of discs.
★ Repeat playback is possible in units of tracks or discs, depending
on the play mode.
★ When playing with the repeat mode turned on, the blank sections
between tracks are cut.
3. Disc tray auto close
1
Disc tray will automatically close after 30 seconds or so
have elapsed in the disc tray auto close mode.
Preset item 7.
4. End of message
1
During playback, the “EOM” indicator starts flashing when
the remaining playing time to the end of the track set in the
preset mode is reached, indicating that the end of the track
is near.
Preset item 5.
5. Power on play
1
Single relay playback starts automatically when the power is
turned on.
• The “”indicator lights in the power on play mode.
• Playback is performed in the continuous repeat mode
when a disc is only loaded in one CD player.
• Normal playback resumes when the CONT./SINGLE
button is pressed.
LOCK
NOTES:
• When playing track ends in the repeat mode, the blank
sections are cut so the “ ” indicator lights.
The manual search, scan and pause operation cannot be
performed, the play mode cannot be set and the repeat
mode cannot be turned on and off when the “ ”
indicator is lit.
• The relay mode and repeat mode cannot be selected at the
same time.
LOCK
LOCK