Filter
Top Products
5
ENGLISH
Thank you for purchasing the DENON compact disc player. Read the Operating Instructions thoroughly, and operate this player properly.
TABLE OF CONTENTS
z
MAIN FEATURES ……………………………………………………5
x
BEFORE USING ………………………………………………………5
c
CAUTIONS ON INSTALLATION ……………………………………6
v
CAUTIONS DURING USE ……………………………………………6
b
INSTALLATION ……………………………………………………7, 8
• ACCESSORIES
Check that the following parts are included in addition to the main unit.
n
STAND-ALONE PLAYBACK ……………………………………9~11
m
DAISY CHAIN PLAYBACK………………………………………11~14
,
COMPACT DISCS …………………………………………………14
.
TROUBLESHOOTING ………………………………………………15
⁄0
SPECIFICATIONS ……………………………………………………15
MAIN FEATURES
BEFORE USING
Pay attention to the following before using this unit:
• Moving the set.
To prevent short circuits or damaged wires in the connection cords,
always unplug the power cord and disconnect the connection cords
between all other audio components when moving the set.
• Before turning the power operation switch on.
Check once again that all connections are proper and that there are
not problems with the connection cords. Always set the power
operation switch to the standby position before connecting and
disconnecting connection cords.
• Store this instructions in a safe place.
After reading, store this instructions along with the warranty in a
safe place.
Also fill in the items on the back page for your convenience.
• Note that the illustrations in this instructions may differ from
the actual set for explanation purpose.
W Warranty.………………………1
Y Connection cords
(COAX for daisy chain).....……2
(1) 100-CD rack type CD changer
The CDs are stored in a rack so they can be loaded and replaced
easily.
(2) Daisy chain connection
The DCM-5001 can be connected as a sub unit in a daisy chain to
the DCM-5000 (main unit). In this case, up to five DCM-5001s can
be connected, transforming the system into a CD changer with a
maximum of 600 discs.
In addition, the features described below can be used when
connected in daisy chain to the DCM-5000.
• CD-TEXT compatibility
The CD-TEXT data is automatically transferred to the main unit.
• Disc file function
The disc file input operations (disc titles, track titles, artists’
names and group registration) can be performed from the main
unit. This information can be viewed on the main unit’s display
or on the on-screen display. For details on disc files, refer to the
DCM-5000’s operating instructions.
• AL24 Processing and HDCD
®
(High Definition Compatible
Digital
®
)
When connected in a daisy chain, the audio signals are
transferred digitally, providing high quality sound. In addition,
sound can be played through the AL24 Processing and HDCD
®
decoder built into the DCM-5000. For details on AL24
Processing and HDCD
®
, refer to the DCM-5000’s operating
instructions.
(3) Stand-alone operation
In addition to connecting DCM-5001s in a daisy chain, the DCM-
5001 can also be operated independently (stand alone). The zone,
random playback and cross fade modes can be selected using the
mode switches on the rear panel.
(4) Multi-zone system with two CD drive mechanisms
The DCM-5001 is equipped with two CD drive mechanisms, so
separate playback signals can be output from the two zones.
(5) Quick access (in the single zone mode)
The two CD drive mechanisms can be used alternately so that CDs
can be played consecutively with no waiting time when switching
to the next CD.
4 5 6 7
Q Operating instructions .………1
T Connection cords
(audio).…………………………2
R Connection cord
(5P MINI-DIN)
for daisy chain connection..…1
E Service station list ……………1
U CD booklet file
and label.....……………………1
1
2