Filter
Top Products
45
[1] Playing sources recorded in Dolby Pro Logic in the Home THX Cinema surround mode
1
Select the Home THX Cinema mode.
HOME
THX CINEMA
(Main unit) (Remote control unit)
2
Play a program source with the mark.
• For operating instructions, refer to the manuals of the
respective components.
[2] To play in the THX Surround EX/Home THX Cinema Surround mode for sources recorded in Dolby Digital or DTS
1
1
1
Select the program source.
Selecting a digital input source
Perform step 1 under “Dolby Digital mode and DTS
Surround” (page 46).
2
Select the Home THX Cinema mode.
HOME
THX CINEMA
(Main unit) (Remote control unit)
3
Play a program source with the , mark.
For operating instructions, refer to the manuals of the
respective components.
The channel status information during playback of Dolby
Digital and DTS sources can be checked using the “STATUS”
button on the main unit.
The Dolby Digital indicator lights when playing
Dolby Digital sources.
DIGITAL
2 3
3
1
Surround parameters q
AFDM (Auto Flag Detect Mode):
Select the Auto Flag Detect Mode. (See page 21.)
SB CH OUT:
When Auto Flag Detect Mode is set to “OFF”, the reproduction method of a surround back channel can be chosen.
The parameter which can be chosen is equivalent to the contents of a setting of Non Flag Source SBch Output (see page 21).
When Auto Flag Detect Mode is set to “ON”, the parameter selected by Non Flag Source SBch Output of Setup Menu is displayed (see page
21).
When you change a parameter, please set Auto Flag Detect Mode to OFF.
When playing DTS sources, the DTS indicator
lights.
The surround back LED lights green when playing
in the THX SURROUND EX mode.
THX Surround EX / Home THX Cinema mode
When the HOME THX CINEMA button is pressed, the surround mode is set as follows according to the signal that is played:
q THX Surround EX
w Home THX CINEMA
e THX 5.1
When the HOME THX CINEMA mode is set when a DVD is played, check the DVD player’s digital output setting and change the setting to one
for which Dolby Digital and DTS bit stream signals can be output (“bit stream”, for example).
When the THX5.1 mode is set, press the 6.1/7.1 SURROUND button and change the parameter’s setting to “ON”.