Filter
Top Products
36
Multi-source recording/playback
[1] Playing one source while recording another (REC OUT mode)
1
Press the REC/M-ZONE 2 button until
“REC OUT SOURCE” appears on the
set’s display.
REC /
M-ZONE 2
2
Select the source you want to record
appears on the set’s display.
• The indicator for the selected
program source lights.
FUNCTION
3
Set the recording mode.
• For operating instructions, refer to the manual of the
component on which you want to record.
4
To cancel, press the REC/M-ZONE 2
button twice.
[2] Recording Dolby Digital and DTS multichannel sources
1
Press the REC/M-ZONE 2 button until
“REC OUT SOURCE” appears on the
display.
REC /
M-ZONE 2
2
Set the input mode according to the
source to be played.
INPUT
MODE
(Main unit)
3
Set the surround mode by pressing the DIRECT or STEREO
button.
• The multichannel digital signals are down-mixed and output
to the TAPE and VCR output terminals.
1, 41, 2 2
VCR -1 -2 V.AUX MD / TAPE -1 -2
PHONO CD TUNER AUX DVD / VDP TV / DBS
2
Display
NOTES:
• Recording sources other than digital inputs selected in the REC
OUT mode are also output to the multi source audio/video
output jacks.
• Digital signals are not output from the MULTI ZONE 1 audio
output jacks.
3
3
(Main unit)
(Main unit)
REC /
M-ZONE 2
(Main unit)
(Main unit)
• With this set it is possible to record Dolby Digital and DTS
multichannel signals converted into 2-channel analog signals.
• The recording signals are output to the MULTI ZONE-2 OUT,
TAPE and VCR output terminals.
STEREO
(Main unit)
or
or
(Remote control unit)
4
Set the recording mode.
With the exception of the case in [2] below, only the signal connected to the analog input jacks are output from the REC OUT and multi-room
output jacks.