Filter
Top Products
43
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together.
Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources.
1
MAIN UNIT:
Select “FADER” using the FUNCTION
knob after selecting “CH. VOL” with
the MODE SELECT button.
REMOTE CONTROL UNIT:
Select “FADER”.
2
The fader function does not affect the SW, EL and ER
channels.
The channel whose channel level is adjusted lowest can be faded
to –12 dB using the fader function.
If the channel levels are adjusted separately after adjusting the
fader, the fader adjustment values are cleared, so adjust the fader
again.
This is only displayed when setting the fader control.
FL C FR SR SBR SBL
SLSW
FADER
When the surround back speaker setting is set to “1spkr” for
“Speaker Configuration”, this is set to “SB”.
In the EXT IN mode, “SBR” is set to “ER”, “SBL” to “EL”.
3
MAIN UNIT:
Turn the CONTROL knob to adjust the
level of the selected speaker.
REMOTE CONTROL UNIT:
Move jog stick “ENTER” back and forth
to adjust the level of the selected speaker.
(Main unit)
(Remote control unit)
4
REMOTE CONTROL UNIT:
Once the channel level adjustment is completed, press the
CURSOR/PAGE button again so that the display is no longer
highlighted, then press the CH. SELECT button.
(Remote control unit)
MAIN UNIT:
Turn the CONTROL knob clockwise to
adjust the volume of the surround side
collectively. Turn the CONTROL knob
counterclockwise to adjust the volume
of the front side collectively.
REMOTE CONTROL UNIT:
Move jog stick “ENTER” to the top side
to adjust the volume of the surround side
collectively.
Move jog stick “ENTER” to the bottom
side to adjust the volume of the front side
collectively.
(Main unit)
(Remote control unit)
2
2
1
FUNCTION
(Main unit)
(Remote control unit)