Denon AVR-3801 Stereo System User Manual


 
59
Checking the preset stations
1
Use the “Auto tuning” or “Manual tuning” operation to tune
in the station to be preset in the memory.
2
Press the MEMORY button.
MEMORY
RETURN
A/B
3
ENTER
SHIFT
Press the SHIFT button and select
the desired memory block (A to E).
4
SKIP
SKIP
CHANNEL
+
-
Press the CHANNEL + (UP) or –
(DOWN) button to select the
desired preset channel (1 to 8).
5
MEMORY
RETURN
A/B
Press the MEMORY button again
to store the station in the preset
memory.
(Remote control unit)
(Remote control unit)
To preset other channels, repeat steps 2 to 5.
A total of 40 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to E.
The preset broadcast stations can be checked on the on screen display.
1
Press the OSD button repeatedly until the “Tuner Preset Stations” screen appears on the on screen
display.
OSD
Preset memory
VCR DBS/CABLE
MEMORY
VOLUME
CHANNEL
VDP DVD
DISPLAY
RETURN
SETUP
MENU
SURR.
PARA.
OSD
A/B
BAND MODE
TUNING
1
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-883
ON /
SOURCE
TUNER
VDP
VCR-1 VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
4
2. 5
3
(Remote control unit)
(Remote control unit)
(Remote control unit)
5
Press the TUNING UP or DOWN
button to tune in the desired
station.
The frequency changes continuously
when the button is held in.
BAND MODE
TUNING
TUNING
NOTES:
When in the auto tuning mode on the FM band, the “STEREO”
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the “TUNED” and
“STEREO” indicators turn off.
When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
(Remote control unit)