Denon AVR-1603 Stereo System User Manual


 
29
ENGLISH
2 Audio section
Power amplifier
Rated output: Front: 70 W + 70 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
100 W + 100 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Center: 70 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
100 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Surround: 70 W + 70 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
100 W + 100 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Output terminals: Front: A or B 16 to 16 /ohms
A + B 12 to 16 /ohms or more
Center/Surround: 16 to 16 /ohms
Analog
LINE input - PRE OUT
Input sensitivity/input impedance: 200 mV/47 k/kohms
Frequency response: 10 Hz ~ 100 kHz: +1, 3 dB (TONE DEFEAT ON)
S/N ratio: 98 dB (IHF-A weighted) (TONE DEFEAT ON)
2 Video section
Standard video jacks
Input/output level and impedance: 1 V p-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +1, 3 dB
S-video jacks
Input/output level and impedance: Y (brightness) signal 1 Vp-p, 75 /ohms
C (color) signal 0.286 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +1, 3 dB
2 Tuner section
[FM] (note:
µ
V at 75
/ohms, 0 dBf = 1 x 10
15
W) [AM]
Receiving range: 87.50 MHz ~ 108.00 MHz 522 kHz ~ 1611 kHz
Usable sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB quieting sensitivity: MONO 1.6
µ
V (15.3 dBf)
STEREO 23
µ
V (38.5 dBf)
S/N ratio: MONO 80 dB (IHF-A weighted)
STEREO 75 dB (IHF-A weighted)
Total harmonic distortion: MONO 0.15 % (1 kHz)
STEREO 0.3 % (1 kHz)
2 General
Power supply: AC 230 V, 50 Hz
Power consumption: 210 W
Maximum external dimensions: 434 (W) x 147 (H) x 417 (D) mm
Mass: 10.4 kg
2 Remote control unit (RC-920)
Batteries: R6P/AA Type (two batteries)
External dimensions: 55 (W) x 225 (H) x 34.5 (D) mm
Mass: 165 g (including batteries)
For purposes of improvement, specifications and design are subject to change without notice.
20
SPECIFICATIONS