Denon AVR-1082 Stereo System User Manual


 
33
ENGLISH
12
LISTENING TO THE RADIO
Auto tuning
B
1
1
Set the input function to TUNER.
FUNCTION
(Main unit)
2
Press the RECEIVER button
on the remote control unit to
select TUNER.
RECEIVER
(Remote control unit)
3
Watching the display, press
the BAND button to select
the desired band (AM or
FM).
BAND MODE
TUNING
TUNING
1
TUNER
(Remote control unit)
(Remote control unit)
4
Press the MODE button to
set the auto tuning mode.
BAND MODE
TUNING
TUNING
(Remote control unit)
Auto appears on the
display.
5
Press the TUNING UP or
DOWN button.
BAND MODE
TUNING
TUNING
(Remote control unit)
Automatic searching begins,
then stops when a station is
tuned in.
If tuning does not stop at the desired station, use to
the Manual tuning operation.
1
2
3
456
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP DVDCDR/TAPE
PHONO
CD
DISPLAY
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
3, 4, 5
1
2
Manual tuning
1
Set the input function to TUNER.
FUNCTION
(Main unit)
2
Press the RECEIVER button
on the remote control unit to
select TUNER.
RECEIVER
(Remote control unit)
1
TUNER
(Remote control unit)
3
Watching the display, press
the BAND button to select
the desired band (AM or
FM).
BAND MODE
TUNING
TUNING
(Remote control unit)
4
Press the MODE button to
set the manual tuning mode.
Check that the displays
AUTO indicator turns off.
BAND MODE
TUNING
TUNING
(Remote control unit)
5
Press the TUNING UP or
DOWN button to tune in the
desired station.
The frequency changes
continuously
when the
button is held in.
BAND MODE
TUNING
TUNING
(Remote control unit)
NOTES:
When in the auto tuning mode on the FM band, the
STEREO indicator lights on the display when a
stereo broadcast is tuned in. At open frequencies,
the noise is muted and the TUNED and
STEREO indicators turn off.
When the manual tuning mode is set, FM stereo
broadcasts are received in monaural and the
STEREO indicator turns off.
Preset memory
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
4
2. 5
3
1
Use the Auto tuning or Manual tuning
operation to tune in the station to be preset in
the memory.
2
Press the MEMORY button.
MEMORY
RETURN
A/B
(Remote control unit)
3
Press the SHIFT button and
select the desired memory
block (A to E).
ENTER
SHIFT
(Remote control unit)
5
Press the MEMORY button
again to store the station in
the preset memory.
MEMORY
RETURN
A/B
(Remote control unit)
To preset other channels, repeat steps 2 to 5.
A total of 40 broadcast stations can be preset
8 stations (channels 1 to 8) in each of blocks
A to E.
Checking the preset stations
1
Press the OSD button repeatedly until the Tuner Preset Stations screen
appears on the on screen display.
OSD
(Remote control unit)
The preset broadcast stations can be checked on the on screen display.
VCR DBS/CABLE
MEMORY
VOLUME
CHANNEL
VDP DVD
DISPLAY
RETURN
SETUP
MENU
SURR.
PARA.
OSD
A/B
BAND MODE
TUNING
1
4
Press the CHANNEL + (UP)
or (DOWN) button to select
the desired preset channel (1
to 8).
SKIP
SKIP
CHANNEL
+
-
(Remote control unit)