Filter
Top Products
15
ENGLISH
Set the multi pre-out output level adjustment.
Setting the multi vol. level
1
At the “System Setup Menu” screen, select
“Multi Vol. Level” and press the ENTER
button.
BAND MODE
TUNING
TUNING
2
Select the desired settimg.
0 dB, -40 dB:
The output level is fixed at the set level and the volume can
no longer be adjusted.
Variable:
The level can be adjusted freely using the buttons on the
remote control unit.
BAND MODE
TUNING
TUNING
3
Enter the setting.
The “System Setup Menu” reappears.
ENTER
SHIFT
ENTER
SHIFT
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
Setting the on-screen display (OSD)
1
At the System Setup Menu select “On Screen Display”.
BAND MODE
TUNING
TUNING
2
Switch to the On Screen Display screen.
ENTER
SHIFT
3
Select “ON” or “OFF”.
BAND MODE
TUNING
TUNING
4
Enter the setting.
The System Setup Menu reappears.
ENTER
SHIFT
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8, B1 to
8, C1 to 8, D1 to 8 and E1 to 8.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to
tune in the station, then preset it using the manual “Preset memory” operation.
Auto tuner preset
1
Use the CURSOR buttons to specify “Auto Tuner Presets”
from the “System Setup Menu” screen.
BAND MODE
TUNING
TUNING
2
Press the ENTER button.
The “Auto Preset Memory” screen appears.
ENTER
SHIFT
3
Use the CURSOR button to select “Yes”.
“Search” flashes on the screen and searching begins.
“Completed” appears once searching is completed.
The display automatically switches to screen.
BAND MODE
TUNING
TUNING
This completes system setup. Once these settings are made, there is no need to change them unless
different AV components are connected or the speakers are repositioned.