Filter
Top Products
Operation Operation
9
ENGLISH
ENGLISH
Listening to all the tracks repeatedly
(All-track repeat play)
Press [REPEAT] once.
• The “RPT” indicator lights.
Press
<
1/3
>
or [1].
• During normal playback:
All the tracks are played repeatedly.
• During programmed playback:
The tracks are played repeatedly in the programmed order.
• In the random play mode:
The tracks are played once each in random order, then played
again in a different order.
1
2
Listening to tracks repeatedly (Repeat play)
¢ Stopping all-track repeat playback:
Press [REPEAT] twice in a row, or press 5 to open the disc tray.
• In the programmed play or random play mode during all-track repeat
playback, normal playback resumes when [REPEAT] is pressed once.
Listening to a specific track repeatedly
(1-track repeat play)
During playback, press [REPEAT] twice in a row.
• The “RPT1” indicator lights and that track is played repeatedly.
¢ Stopping 1-track repeat playback:
Press [REPEAT] again, or press 5 to open the disc tray.
• 1-track repeat playback is not possible during programmed or
random playback.
Listening to a specific section between two
points repeatedly (A-B repeat play)
During playback, press [A-B] at the point at which
you want to start repeating (point A).
• The “A-” indicator lights.
During playback, press [A-B] at the point at which
you want to stop repeating (point B).
• The “A-B” indicator lights and the A-B section is played
repeatedly.
1
2
¢ Stopping A-B repeat playback:
Press [A-B] again.
• A-B repeat playback is not possible during programmed playback or
random playback.
Cuing with direct searching
Either press
<
1/3
>
twice or press [3] once.
Use [NUMBER] (0 ~ 9, +10) to select the track.
1
2
Cuing and stopping playback (Pause)
¢ To start playback:
Press
<
1/3
>
or [1].
Cuing with programmed searching
Press [PROGRAM].
Use [NUMBER] (0 ~ 9, +10) to select the track.
1
2
¢ To start playback:
Press
<
1/3
>
or [1].
Either press
<
1/3
>
twice or press [3] once.
3
Using the timer play function
Also refer to the operating instructions of the timer device.
DCD-500AE (This unit)
Amplifier
Timer device
AC outlet
(Wall)
Turn on the power of the connected components.
Switch the amplifier’s input function to the function
to which the player is connected.
1
2
Load a disc in the player.
3
Set the audio timer for the desired times.
4
Turn the timer “ON”.
• The power of the components connected to the timer turns
off.
When the set time is reached, the power of the different
components automatically turns on and playback starts from the
first track.
5