Filter
Top Products
7
ENGLISH
ENGLISH
Turning the power on
2
[
1
]
[
3
]
[
6
]
5
[
7
]
TIME
<POWER>
<
1
/
3
>
2
5
TIME
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Operation
Press
<
POWER
>
.
• When a disc is loaded, playback starts automatically.
• If no disc is loaded “NO DISC” is displayed.
¢ To turn off the power:
Press
<
POWER
>
again.
NOTE:
•To turn off the power while a disc is playing, be sure to press 2
to stop playback before turning off the power.
Loading discs
Press 5 to open the disc tray.
( page 2)
¢ To close the disc tray:
Press 5 again.
NOTE:
• Be sure to turn on the power when opening and closing the disc
tray.
• Do not push the disc tray in by hand when the power is off. Doing
so could damage it.
• Do not insert foreign objects into the disc tray. Doing so will
damage it.
Starting playback
Press
<
1/3
>
or [1].
• The “1” indicator lights and playback starts.
Once all the tracks remove recorded on the disc have been
played, the stop mode is set automatically.
TIME can be used to switch the information displayed.
To stop playback
Press 2 during playback.
To pause playback
Press
<
1/3
>
or [3] during playback.
• The “3” indicator lights and the pause mode is set.
¢ To resume playback:
Press
<
1/3
>
or [1].
Fast-forwarding and fast-reversing through
tracks (Search)
Press and hold [6] or [7] during playback.
Normal playback resumes when you release your finger from the
button.
• The sound may be interrupted shortly when resuming normal
playback after searching.
Elapsed time of
currently playing
track
Remaining time of
currently playing
track
Remaining time of all remaining tracks
During programmed playback, the remaining time of all the
programmed tracks is displayed.