Filter
Top Products
ENGLISH
Operation
Various playback functions
Playing a specific track
(Remote control unit only) [Direct play]
Use the number buttons and the +10 button to
select the desired track.
• Ex. : To select track 4 :
To select track 12 :
,
To select track 30 :
,
, ,
Playback starts from the selected track.
0
+10+10+10
2
+10
4
Stopping playback temporarily [Pause]
During playback, press the 1/ 3 button (or the 3
button on the remote control unit).
•Playback pauses.
To resume playback from the position at which the disc
is paused, press the
1/ 3 button (the 1 button, or the
3 button on the remote control unit).
• Use this function to stop playback temporarily,and later
resume playback from that point.
Automatic search
Press the 9 button.
•Press the button more than once to move ahead to the
beginning of subsequent tracks.
When the
9 button is pressed during random
playback, the next track is selected at random and
played.
2 Moving ahead to the beginning of the next track
Press the 8 button.
•Press the button more than once to move back to the
beginning of previous tracks.
2 Moving back to the beginning of the current track
Starting playback
1
Press the POWER switch to turn on the power.
2
Press the
55
button.
• The disc holder opens.
3
Load the disc you want to play.
For Super Audio CDs, use the
SUPER AUDIO
CD SETUP
button to set the layer to be played,
as necessary.
5
Press the 1/ 3 or 1 button.
• Playback starts.
To check the currently playing layer, press the
SUPER
AUDIO CD SETUP button once. “STEREO” or “CD” is
displayed. Press the button again while one of these is
displayed to switch the layer to be played.
Playback stops automatically after the last track on the
disc has been played.
For instructions on loading discs, refer to “OPENING
AND CLOSING THE DISC HOLDER AND LOADING
DISCS” ( page 7).
Stopping playback
During playback, press the
22
button.
• Playback stops.
4
8
ENGLISH