Filter
Top Products
ENGLISH
Connections
Connections to the analog output terminal
Amplifier
R
L
AUDIO IN
R
L
R
L
Connections
• Use the included RCA pin-plug cord to connect the left (L) and right (R) output terminal (ANALOG OUT) of the DCD-2000AE
to the CD, AUX or TAPE PLAY left (L) and right (R) input terminal of the amplifier.
Connections to the digital output terminal (COAXIAL/OPTICAL)
CD Recorder/
D/A Converter/
MD Recorder/
etc.
COAXIAL
IN
OPTICAL
IN
NOTE:
•With Super Audio CDs, no digital signals are output.
• Digital signals are output from optical terminal and coaxial terminal with parallel.
2 Connecting an optical fiber cable (commercially available) to the digital audio input connector (OPTICAL)
Line up in proper direction
Remove the dust cap, line up the cable in the proper directly,
then insert it securely as far as it goes.
NOTE:
•Store the dust cap in a safe place, and be careful not to
lose it.
When not using the terminal, attach the cap to protect
the terminal from dust.
Dust cap
OUT IN
Signal direction
AUDIO Signal
6
ENGLISH