Filter
Top Products
35
Speakers
Speaker Config.
Default settings are underlined.
Indicate speaker presence and select speaker size categories based on bass reproduction capability.
NOTE
Do not use the outward shape of the speaker to determine selection of a “Large” or “Small” speaker.
Instead, use the frequencies set in “Crossovers” (vpage36) as the standard for determining bass
reproduction capability.
Setting items Setting details
Front
Set the front speaker size.
Large : Use a large speaker that can adequately play back very low bass
frequencies.
Small : Use a small speaker that has inadequate playback capacity for very
low bass frequencies. Note that for most multi-channel speakers, this is
the best choice.
•When “Subwoofer” is set to “No”, “Front” is automatically set to
“Large”.
•When “Front” is set to “Small”, “Center” and “Surround“ can not be
set to “Large”.
Center
Set the presence and size of
the center speaker.
Large : Use a large speaker that can adequately play back very low bass
frequencies.
Small : Use a small speaker that has inadequate playback capacity for very
low bass frequencies. Note that this is almost always the best choice.
None : Select when a center speaker is not connected.
“Large” is not displayed when “Front” is set to “Small”.
Surround
Set the presence and size of
the surround speakers.
Large : Use a large speaker that can adequately play back very low bass
frequencies.
Small : Use a small speaker that has inadequate playback capacity for very
low bass frequencies. Note that this is almost always the best choice.
None : Select when the surround speakers are not connected.
Subwoofer
Set the presence of a
subwoofer.
Yes : Use a subwoofer.
No : Select when a subwoofer is not connected.
When “Front” is set to “Small”, “Subwoofer” is automatically set to
“Yes”.
Distances
Default settings are underlined.
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each speaker.
Setting items Setting details
Step
Set the minimum variable
width of the distance.
1ft : For changing in 1-foot steps.
0.1ft : For changing in 0.1-foot steps.
Front L / Front R / Center /
Subwoofer / Surround L /
Surround R
Select speaker for distance
setting.
0.0ft – 60.0ft : Set the distance.
•The speakers that can be selected differ depending on the “Speaker
Config.” (vpage35) settings.
•Default settings :
Front L / Front R / Center / Subwoofer : 12.0 ft
Surround L / Surround R : 10.0 ft
•Set the difference in the distance between the speakers to less than
20 ft.
NOTE
Speakers set to “None” in “Speaker Config.” (vpage 35) are not
displayed.
Levels
Default settings are underlined.
Set the volume of the test tone to be the same when it is output from each speaker.
Setting items Setting details
Test Tone Start
Output test tone.
Front L / Center / Front R / Surround R / Surround L / Subwoofer : A
test tone is output from the selected speaker. While listening to the test
tone, adjust the volume output from the selected speaker.
•–12.0dB – +12.0dB (0.0dB) : Adjust the volume.
•When o is pressed while the subwoofer volume is set to “–12 dB”, the
“Subwoofer” setting switches to “Off”.
•When “Levels” is adjusted, the adjusted values are set for all the
surround modes.
NOTE
•Speakers set to “None” in the “Speaker Config.” (vpage 35)
settings are not displayed.
•When a headphones jack is inserted in the PHONES jack of this unit, the
“Levels” is not displayed.
Basic instructions
Advanced instructions
Information
Advanced instructions
DVD