Filter
Top Products
17
Tuning in radio stations
For antenna connections, see “Connecting an FM/AM antenna”
(vpage13).
How to tune in
The modes for receiving FM/AM broadcasts consists of “AUTO”
mode that automatically searches available broadcast stations and
“MANUAL” mode that lets you tune in using buttons to change the
frequency. The default setting is “AUTO”.
In “AUTO” mode, you cannot tune in to radio stations if the reception
is not good. If this is the case, then use the “MANUAL” to tune in.
Listening to FM/AM broadcasts
1
Press TUNER to switch the input
source to “TUNER”.
2
Press BAND to select “FM” or
“AM”.
FM
When listening to an FM broadcast.
AM
When listening to an AM broadcast.
GTV ScreenH
TUNER
A1
Tuning
Preset
Band
Memory
Mode
FM 92.1MHz
AUTO
Now Playing
TUNE BAND
CHANNEL
MODE
MEMORY
GDisplay of this unitH
A1 FM 92.1MHz
3
Tune in the desired broadcast station.
AUTO
Automatically tune to the station.
q Press
MODE to select “AUTO”.
MODE:AUTO
w Press TUNE + or TUNE – to select the station you want to
hear.
•The frequency changes in steps each time the button is
pressed.
MANUAL
Manually tune to the station.
q Press
MODE to select “MANUAL”.
MODE:MANUAL
w Press TUNE + or TUNE – to select the station you want to
hear.
•The frequency changes in steps each time the button is
pressed.
When tuning in stations manually, press and hold TUNE + or
TUNE – to change frequencies continuously.
n Presetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
•Stations can be preset automatically at “Auto Preset”
(vpage32). If “Auto Preset” is performed after performing
“Manual preset”, the “Manual preset” settings will be overwritten.
1
Tune in the broadcast station you
want to preset.
2
Press MEMORY.
GTV ScreenH
Tuning
Preset
Band
Memory
Mode
TUNE
SHIFT
BAND
CHANNEL
CHANNEL
MODE
MEMORY
MEMORY
TUNER
A1
To store preset:
select
A1-G8
GDisplay of this unitH
Storing Station
3
Press CHANNEL + or CHANNEL – to select the preset
number.
•Press SHIFT, and then the block (A – G) can be selected.
4
Press MEMORY again to complete the setting.
•To preset other stations, repeat steps 1 to 4.
Basic instructions
Advanced instructions
Information
Basic instructions
DVD