Filter
Top Products
15
Playback (Basic operation)
n Playing a Blu-ray Disc player/DVD player
(vpage16)
n Playing a portable player (vpage16)
n Tuning in radio stations (vpage17)
Selecting a listening mode (Surround mode)
(vpage19)
n Turning the power on (vpage15)
n Selecting the input source (vpage15)
n Adjusting the master volume (vpage16)
n Turning off the sound temporarily (vpage16)
n Switching the brightness of the display
(vpage16)
Playback (Advanced operation) (vpage27)
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Turning the power on
Press POWER X to turn on power to
the this unit.
The power indicator flashes green and the
power turns on.
You can also switch the power to standby by pressing X on the main
unit.
n When power is switched to standby
Press POWER X.
GPower indicator status in standby modeH
•Normal standby : Off
•When “Pass Through” (vpage38) is set to “On” : Red
Selecting the input source
Press the input source select button
(CBL/SAT, DVD, Blu-ray, GAME,
AUX, PORTABLE, TV AUDIO or
TUNER) to be played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Select the input source using the main unit
Use SOURCE SELECT 0 1.
•Use SOURCE SELECT 0 1 switches the input source, as shown
below.
Blu-rayDVD
TUNERTV AUDIO AUX
CBL/SAT GAME
PORTABLE
Basic instructions
Advanced instructions
Information
Basic instructions
DVD