Filter
Top Products
ZONE2 Setup
Make settings for audio playback in a ZONE2 system.
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone2 Setup
5.Option Setup
3.Audio Setup
2-4.Zone2 Setup
Level Lch : 0
dB
Rch : 0
dB
Vol.Level : VAR
Vol.Limit : OFF
Power On Lev.: Last
Mute Lev. : Full
[Selectable items]
OFF
: Do not set a maximum volume.
–20dB
: Set the maximum volume to –20 dB.
–10dB
: Set the maximum volume to –10 dB.
0dB
: Set the maximum volume to 0 dB.
[Selectable items]
Last
: Use the memorized setting from the last session.
– – –
: Always use the muting on condition when power
is turned on.
–70dB ~ +18dB
: Set the volume level when the power is turned on
in units of 1 dB.
[Selectable items]
Full
: The sound is cut off entirely.
–40dB
: The sound is attenuated by 40 dB.
–20dB
: The sound is attenuated by 20 dB.
[Variable range]
–12dB
~
0dB
~
+12dB
[Variable range]
–12dB
~
0dB
~
+12dB
[Selectable items]
VAR
: Allow volume adjustment by remote control.
–40dB
: Fix the volume to –40 dB.
0dB
: Fix the volume to 0 dB.
“VAR” is displayed when a power amplifier is assigned to the ZONE2
output channel at menu “Manual Setup” – “Option Setup” – “Amp
Assign” (vpage 30).
0
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
Option Setup
Make various other settings.
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone Setup
5.Option Setup
3.Audio Setup
a
Amp Assign
Define how the amplifier for the surround back speaker channels
is used.
The places where the surround back amplifier are used can be set
freely according to the usage environment. This makes it possible to
output sound to rooms other than the room (the main zone) where
surround playback is performed (multi-zone playback) or play the sound
with high quality using the front speakers (bi-amp connections).
[Selectable items]
7.1ch
ZONE2
FrontA Bi-Amp
FrontB Bi-Amp
2ch
For details, see “Amp Assign / Multi-zone Connections and Operations”
(vpage 55 ~ 57).
2.Vol.Control
3.Source Delete
4.On Screen Display
5.Quick Select Name
6.Trigger Out
7.Remote ID Setup
8.2Way Remote
9.Display
10.Setup Lock
1.Amp Assign
2-5.Option Setup
a
Lch Level
Adjust the left channel output level.
s
Rch Level
Adjust the right channel output level.
d
Volume Level
Adjust the main volume level.
f
Volume Limit
Make a setting for maximum volume.
g
Power On Level
Define the volume setting that is active when the power is turned
on.
h
Mute Level
Set the amount of attenuation when muting is on.
1.AVR988EU_101_4th.indd 33 2007/09/13 11:32:20