Filter
Top Products
Getting Started Playback Remote Control Information Troubleshooting Specifications
ENGLISH
Settings
R
L
R
L
w qw q
(R) (L)
w q
*/
w q w q
(L) (R)
w q
(R)
w q
(L)
Subwoofer with
builtin amplifier
Center
speaker
Surround
speakers
Front
speakers
Connecting the Speakers
Connections
Installing/Setting the Speakers
s
Set the “Pre Assign” Mode According to the Speaker Layout.
The signals output from the AVR-590’s SURR. BACK / FRONT HEIGHT PRE OUT connectors can be
switched to signals of the surround mode being used (vpage 24 “Pre Assign”).
Pre Assign mode
(vpage 24)
The speaker which plays the a
sound output from the SURR.
BACK / FRONT HEIGHT PRE
OUT connectors
Example of speaker installation
Normal
(Default)
Surround back
speakers
Normal
Surround back
speakers
b Connect to the SURR. BACK /
FRONT HEIGHT PRE OUT “L”
connector.
b Set “S.Back (Pre out)” (vpage
25) to “1ch”.
Normal
Not connected
b
Set the “S.Back (Pre out)” setting
(vpage 25) to “None”.
Front Height
Front Height
speakers
(7.1)
(6.1)
(5.1)
(7.1)
To play surround back speakers or front height speakers,
connect a power amplifier to the AVR-590’s SURR. BACK /
FRONT HEIGHT PRE OUT connectors.
Make the “Pre Assign” (vpage 24) settings.
Front Height
speakers
Surround back
speakers
or
Power amplifier