Filter
Top Products
Setup
Speaker Setup
Perform this setting if you wish to make the settings for your
speaker systems manually.
a ~ f Speaker Configuration
g Subwoofer Mode Setup
h ~ A1 Distance
A2 Crossover Frequency
A3 Test Tone
Center Speaker
Select center speaker use and size.
[Selectable items]
Large
Small
None
• This can be set when “System Setup” – “Speaker Setup” –
“Subwoofer” is set to “Yes”.
• Play music or a movie source and select the mode offering the
strongest bass.
• Select “LFE+Main” if you want the bass signals to always be
produced from the subwoofer.
• Select “Large” or “Small” not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based on the frequency set at “Crossover Frequency” (vpage
21).
• When “Front Speaker” is set to “Small”, “Subwoofer” is automatically
set to “Yes”.
• If “Subwoofer” is set to “No”, “Front Speaker” is automatically set to
“Large”.
g
Subwoofer Mode Setup
Select low range signal to be reproduced by subwoofer.
[Display]
1.Sp 2.In 3.Op
Q
Speaker Setup
Q
5 SW Mode Norm
[Selectable items]
LFE (Normal)
: Play low range and LFE signal of channels set to
“Small”.
LFE+Main
: Play low range and LFE signal of all channels.
Large
: Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
: Select this when using small speakers without ample low
frequency reproduction capabilities.
None
: Select this when no speaker is connected.
Yes
: Select this when a subwoofer is connected.
No
: Select this when no subwoofer is connected.
Subwoofer
Select subwoofer use.
[Selectable items]
Yes
No
Surround Speaker
Select surround speakers use and size.
[Selectable items]
Large
Small
None
a ~ f Speaker Configuration
Select speaker configuration and size.
(bass reproduction capability)
[Display]
1.Sp 2.In 3.Op
Q
Speaker Setup
Q
1 Front Large
Q
4 Subwoofer Yes
Front Speaker
Select front speaker size.
[Selectable items]
Large
Small
Operations (vpage 19)
h ~ A1 Distance
Set distance from listening position to speakers.
Before making the settings, measure the distance from the
listening position to the different speakers.
[Display]
1.Sp 2.In 3.Op
Q
Speaker Setup
Q
6 FL 12ft
Q
11 SW 12ft
Distance measurement
Select the speaker you want to set, then set the distance.
Set the value closest to the measured distance.
[Variable range]
0ft ~ 60ft
: Settable in units of 1 foot.
NOTE
Set the distance between the listening position and the various
speakers to no more than 20 ft.
0
Getting Started Connections Playback Remote Control Information Troubleshooting
ENGLISH