Filter
Top Products
151
Specifying the zone used with the
remote control unit
To prevent accidental misuse, you can set the zone for which the
remote control unit is used.
Press and hold any of the MAIN, 2 or
3
buttons and SETUP at the same time
for three seconds or longer.
The operation mode indicator flashes twice.
GSettable itemsH
MAIN
When only using “MAIN ZONE”
2
When using “MAIN ZONE” /
“ZONE2”
3
When using “MAIN ZONE” /
“ZONE2” / “ZONE3” (Default)
Resetting the remote control unit
All the settings are restored to their defaults.
1
Press and hold MENU for at least
3 seconds.
The operation mode indicator flashes
twice.
2
Press 9, 8 and 1, in that order.
The remote control unit operation mode
indicator flashes twice.
All the settings are restored to their
defaults.
Basic version
Advanced version
Informations
Advanced version
DVD