Filter
Top Products
121
Video
Setting items Setting details
HDMI Control
You can link operations with
devices connected to HDMI
and compatible with HDMI
Control.
On : Use HDMI control function.
Off : Do not use HDMI control function.
•When a device that is not compatible with the HDMI control function is
connected, set “HDMI Control” to “Off”.
•Please consult the operating instructions for each connected device to
check the settings.
•Refer to “HDMI control function” (vpage 95) for more information
about the HDMI control function.
NOTE
•When “HDMI Control” is set to “On”, it consumes more standby
power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
•The HDMI control function controls operations of a TV that is compatible
with the HDMI control function. Make sure that the TV and HDMI are
connected when you perform HDMI control.
•If the “HDMI Control” settings have been changed, always reset the
power to connected devices after the change.
Standby Source
Sets the HDMI input source
to put into standby when
the power is on.
Last : Enters standby with the previously used input source.
CBL/SAT / DVD / Blu-ray / GAME / MEDIA PLAYER / AUX1 / AUX2 /
CD : Enters standby with each of the input sources assigned to each input
terminal.
“Standby Source” can be set when “HDMI Control” is set to “On”.
Control Monitor
Set the HDMI MONITOR
terminal to output the HDMI
control signal.
Monitor 1 : Output from the HDMI MONITOR 1 connector.
Monitor 2 : Output from the HDMI MONITOR 2 connector.
•“Control Monitor” can be set when “HDMI Control” is set to “On”.
•ARC function works only with the terminal selected by “Control
Monitor”.
Power Off Control
Links the power standby of
this unit to external devices.
All : If power to a connected TV is turned off independently of the input
source, power to this unit is automatically set to standby.
Video : If power to a connected TV is turned off when the input source is
Blu-ray / DVD / TV AUDIO / CBL/SAT / GAME / MEDIA PLAYER / AUX1 /
AUX2, power to this unit is automatically set to standby.
Off : This unit does not link with power to a TV.
“Power Off Control” can be set when “HDMI Control” is set to “On”.
Output Settings
Default settings are underlined.
Makes screen-related settings.
z “Blu-ray”, “GAME”, “AUX2”, “TV AUDIO” or “CD” can be set when “HDMI” or “COMP”
(vpage126) has been assigned.
“Output Settings” can not be set when 4K signals are input.
Setting items Setting details
Video Mode
Make settings for video
processing.
CBL/SAT
DVD
Blu-ray
z
GAME
z
AUX1
AUX2
z
MEDIA PLAYER
CD
z
TV AUDIO
z
Auto : Process video automatically based on the HDMI content
information.
Game : Always process video for game content.
Movie : Always process video for movie content.
•If “Video Mode” is set to “Auto”, the mode is switched according to the
input contents.
•If a source is played in both MAIN ZONE (audio and video) and ZONE2
(audio only) modes in the same room, audio in MAIN ZONE and ZONE2
modes may sound out of synchronization, but this is not malfunction. In
this case, setting to “Game” mode may improve audio synchronization.
Video Conversion
The input video signal is
converted automatically
in conjunction with
the connected TV
(vpage6 “Converting
input video signals for
output (Video conversion
function)”).
CBL/SAT
DVD
Blu-ray
z
GAME
z
AUX1
AUX2
z
MEDIA PLAYER
CD
z
TV AUDIO
z
On : The input video signal is converted.
Off : The input video signal is not converted.
•When a non-standard video signal from a game machine or some other
source is input, the video conversion function might not operate. In this
case set “Video Conversion” to “Off”.
•When “Video Conversion” is set to “Off”, the video conversion function
does not work. In this case, connect this unit and TV with the same type
of cable.
Basic version
Advanced version
Informations
Advanced version
v See overleaf
DVD