Filter
Top Products
Getting Started Connections Playback Remote Control Information Troubleshooting Specifications
ENGLISH
Multi-Zone
Making the input settings (Input Setup)
Setting items Setting contents
Input Assign(Component)
Assign input sources to input
connectors.
Component : The
DVD
HDP
TV
SAT/CBL
VCR
DVR
V.AUX
input sources are assigned to the component video input terminals as
shown below.
COMP1 (Component video 1 input terminal) / COMP2 (Component
video 2 input terminal)
None
: Do not assign the component video input terminals to the currently
selected input source.
bUpon purchase, the settings of the different input sources are as shown
below.
Input
source
DVD HDP TV SAT/CBL VCR DVR V.AUX
Default
setting
COMP1 None None None None COMP2 None
●
●
iPod Dock
Change the input source to
which the control dock for
iPod is assigned.
The control dock for iPod can be assigned to the
DVD
SAT/CBL
VCR
DVR
V.AUX
CD
input sources.
Assign
: Assign the currently selected input source to the Control Dock for
iPod input.
None
: Do not assign the currently selected input source to the Control Dock
for iPod input.
• With the default settings, the control dock for iPod can be used
connected to the VCR (iPod) connector.
• Even if “iPod Dock” is set to “Assign”, if AVR-1910 and control dock
for iPod are not connected, the input is used as the normal input
source.
Setting items Setting contents
Input Assign(HDMI)
Assign input sources to input
connectors.
HDMI
:
The
DVD
HDP
TV
SAT/CBL
VCR
DVR
V.AUX
input
sources are assigned to the HDMI input terminals as shown below.
HDMI1 / HDMI2 / HDMI3 / HDMI4
None : Do not assign an HDMI input terminal to the currently selected
input source.
bUpon purchase, the settings of the different input sources are as shown
below.
Input
source
DVD HDP TV SAT/CBL VCR DVR V.AUX
Default
setting
HDMI1 HDMI2 None HDMI3 None HDMI4 None
•When HDMI is assigned to an input source, the audio signal switches
to HDMI along with the video signal. To use with the digital audio
input connectors assigned, set menu “Input Mode” (vpage 34) to
“Digital”.
• When the AVR-1910 and TV are connected with an HDMI cable, if the
TV is not compatible with HDMI audio signal playback, only the video
signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the TV.
NOTE
When “HDMI Control” is set to “ON”, HDMI cannot be assigned to “TV”
at the “HDMI” settings (vpage 28).
•
•
Input Assign(Digital)
Assign input sources to input
connectors.
Digital : The
DVD
HDP
TV
SAT/CBL
VCR
DVR
V.AUX
CD
SIRIUS
input sources are assigned to the digital audio input terminals as
shown below.
C1 (COAX1) / C2 (COAX2) / O1 (OPT1) / O2 (OPT2)
None ： Do not assign a digital input terminal to the currently selected
input source.
bUpon purchase, the settings of the different input sources are as shown
below.
Input source
DVD HDP TV SAT/CBL VCR
Default setting COAX1 None OPT1 COAX2 None
Input source
DVR V.AUX CD SIRIUS
Default setting OPT2 None None None
•
•
Changing the Input Sources Assigned to the Input Terminals
(Assign)
Default settings are underlined.
: Moves the cursor (Up/Down/Left/Right)
: Decision the setting
: Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Settings