Filter
Top Products
For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 17).
ZONE2 Setup
Make settings for audio playback in a ZONE2 system.
a
Level Lch
Adjust the left channel output level.
[Variable range]
–12dB
~
0dB
~
+12dB
[Variable range]
–12dB
~
0dB
~
+12dB
s
Level Rch
Adjust the right channel output level.
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.ZONE2 Setup
5.Option Setup
3.Audio Setup
2-4.ZONE2 Setup
Level Lch : 0
dB
Rch : 0
dB
Vol.Limit : OFF
Power On Lev.: Last
Mute Lev. : Full
NOTE
“ZONE2 Setup” is displayed when ZONE2 is selected with “Amp
Assign” (vpage 29).
Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
[Selectable items]
Last
: Use the memorized setting from the last session.
– – –
: Always use the muting on condition when power
is turned on.
[Variable range]
–70dB ~ +18dB
: Set the volume level when the power is turned on
in units of 1 dB.
[Selectable items]
Full
: The sound is cut off entirely.
–40dB
: The sound is attenuated by 40 dB.
–20dB
: The sound is attenuated by 20 dB.
f
Power On Level
Define the volume setting that is active when the power is turned
on.
g
Mute Level
Set the amount of attenuation when muting is on.
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.ZONE2 Setup
5.Option Setup
3.Audio Setup
Option Setup
Make various other settings.
a
Amp Assign
Define how the amplifier for the surround back speaker channels
is used.
The places where the surround back amplifier are used can be set
freely according to the usage environment. This makes it possible to
output sound to rooms other than the room (the MAIN ZONE) where
surround playback is performed (multi-zone playback) or play the sound
with high quality using the front speakers (bi-amp connections).
[Selectable items]
7.1ch
: The surround back channel is output from the
speakers connected to the SURR.BACK/AMP
ASSIGN terminals.
ZONE2
: When ZONE2 power is on, the ZONE2 channel
is output from speakers connected to the SURR.
BACK/AMP ASSIGN terminals.
FrontA Bi-Amp
: The Front A channel for Bi-Amp use is output
from the speakers connected to the SURR.
BACK/AMP ASSIGN terminals.
FrontB Bi-Amp
: The Front B channel for Bi-Amp use is output
from the speakers connected to the SURR.
BACK/AMP ASSIGN terminals.
For details, see “Amp Assign / Multi-zone Connections and Operations”
(vpage 60 ~ 62).
2.Vol.Control
3.Source Delete
4.On-Screen Display
5.Quick Select Name
6.Remote ID Setup
7.2Way Remote
8.Display
9.Setup Lock
1.Amp Assign
2-5.Option Setup
[Selectable items]
OFF
: Do not set a maximum volume.
–20dB
: Set the maximum volume to –20 dB.
–10dB
: Set the maximum volume to –10 dB.
0dB
: Set the maximum volume to 0 dB.
d
Volume Limit
Make a setting for maximum volume.
Specifications
The “Level Lch“ and “Level Rch“ can be set when “Channel“ is set
to “Stereo“.