Denon AVR-1909 Home Theater System User Manual


 
Menu Operations
[SOURCE
CONTROL 1]
ENTER, opRETURN
ui<MENU>
With the AVR-1909, settings and operations for most functions can be
performed by operating while looking at the menus displayed on the
monitor screen.
uiop
[A. MENU]
ENTER
RETURN
[Front]
[Rear]
1
Press <MENU> or [A.MENU].
The menu is displayed.
b To operate from the remote control unit, be sure to set the
[SOURCE CONTROL 1] to “AUDIO”.
2
Press ui to select the item you want to set, then
press ENTER.
3
Press ui again to select the item you want to set,
then press ENTER.
4
To change the setting:
Press ui to select the item you want to change, then
press o p to change the setting.
b To return to the previous item, press RETURN.
b Select “Default Yes”, then press o to reset to the default
setting.
5
Press ENTER to enter the setting.
6
Press <MENU> or [A.MENU] to nish.
Operations
The same operation is possible on the main unit or remote control
unit.
When <MENU> or [A.MENU] is pressed, the settings made up to that
point are entered and the settings menu screen turns off.
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
[Selectable items]
A
B
A + B
Example of Display of Default
Values
In lists of selectable items or adjustable ranges, the item
surrounded by a border is the default value.

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Specifications