Filter
Top Products
ENGLISH
30
Basic Operation Basic Operation
ENGLISH
1
Set the input source to “TUNER”.
2
Press the RDS button until “PTY SEARCH”
appears on the display.
PTY search
Use this function to find RDS stations broadcasting a designated
program type (PTY).
For a description of each program type, refer to “Program Type
(PTY)”.
3
Watching the display, press the PTY button to
call out the desired program type.
4
Press the PRESET • (+) or
ªª
(–) button.
• PTY search begins automatically.
If there is no station broadcasting the designated program
type with the above operation, all the reception bands are
searched.
The station name is displayed on the display after searching
stops.
1
Set the input source to “TUNER”.
2
Press the RDS button until “TP SEARCH”
appears on the display.
TP search
Use this function to find RDS stations broadcasting traffic
programs (TP stations).
3
Press the PRESET • (+) or
ªª
(–) button.
• TP search begins automatically.
If no TP station is found with the above operation, all the
reception bands are searched.
The station name is displayed on the display after searching
stops.
4
To continue searching, repeat step 3.
If no other TP station is found when all the frequencies have
been searched, “NO PROGRAMME” is displayed.
RT (Radio Text)
“RT” appears on the display when radio text data is received.
1
Set the input source to “TUNER”.
2
Press the RT button.
While receiving an RDS broadcast station, the text data
broadcast from the station is displayed.
To turn the display off, press the RT button again.
If no text data is being broadcast, “NO TEXT DATA” is
displayed.
5
To continue searching, repeat step 4.
If no station broadcasting the designated program type is
found when all the frequencies have been searched, “NO
PROGRAMME” is displayed.
1
Set the input source to “TUNER”.
2
Press the RDS button until “RDS SEARCH”
appears on the display.
3
Press the PRESET • (+) or
ªª
(–) button.
• The search for RDS stations begins automatically.
If no RDS stations are found with the above operation, all
the reception bands are searched.
When a broadcast station is found, that station’s name
appears on the display.
RDS search
Use this function to automatically tune to FM stations that
provide the RDS service.
4
To continue searching, repeat step 3.
If no RDS station is found when all the frequencies have
been searched, “NO RDS” is displayed.
(Main unit) (Remote control unit)