Denon AVR-1306 Stereo Receiver User Manual


 
ENGLISH
22
Basic Operation Basic Operation
ENGLISH
2 Surround parameters w
DTS NEO:6 Mode:
Cinema:
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).
Music:
This mode is suited mainly for playing music. The front channel
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been
added.
Dolby Digital mode and DTS surround
(only with digital input)
1
Select an input source set to digital (COAXIAL/
OPTICAL) ( page 15).
Example: DVD
(Main unit) (Remote control unit)
Play a program source with the or
symbol.
The Dolby Digital indicator lights
when playing Dolby Digital
sources.
The DTS indicator lights when
playing DTS sources.
Lights
Lights
4
5
Press the SURROUND PARAMETER button to
select the various parameters.
The parameter switches as shown below each time the
button is pressed.
CINEMA EQ
D.COMP.
TONE DEFEAT
LFE
DEFAULT
If you do want the bass and treble to be adjusted, turn off
the tone defeat mode.
6
Turn the SELECT knob, and press the CURSOR
FF
or
GG
button to set the various surround
parameters.
The mode switches as shown below each time the button
is pressed.
CINEMA EQ setting:
CINEMA EQ OFF
ON OFF
3
Press the STANDARD button to select the
STANDARD (Dolby/DTS Surround) mode.
2
Press the INPUT MODE button to set the input
mode to “AUTO” or “DTS”.
TONE DEFEAT setting
TONE DEF. ON
ON OFF
DEFAULT setting
7
Press the ENTER button to finish the surround
parameter mode.
When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
DEFAULT Y/N
YES Y/N NO
Select “YES” to reset to the factory defaults.
LFE 0dB
-10dB -5dB 0dB
This parameter is displayed during DOLBY DIGITAL playback.
LFE setting
D. COMP. setting
D.COMP. OFF
OFF LOW MID HIGH