Denon AVR-1306 Stereo Receiver User Manual


 
ENGLISH
15
System Setup System Setup
ENGLISH
Select “OFF” if nothing is connected.
“TUNER” and “V. AUX” cannot be selected.
The surround mode used last for the three types of input signals
shown below is stored in the memory, and the signal is
automatically played with that surround mode the next time it is
input.
Note that the surround mode setting is also stored separately for
the different input sources.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals in the Dolby Digital, DTS or another multi-
channel format (DOLBY PLII Cinema)
e Multi-channel signals in the Dolby Digital, DTS or another multi-
channel format (DOLBY/DTS SURROUND)
Default settings are indicated in ( ).
Setting the Auto Surround Mode
Press the CURSOR
FF
or
GG
button to select the Auto
Surround mode, then press the ENTER or CURSOR
HH
button to switch the Ext. In Subwoofer Level
setting.
*Auto Surr. ON
ON OFF
Set the method of playback of the analog input signal connected
to the EXT. IN terminal.
Setting the Ext. In Subwoofer Level
Press the CURSOR
FF
or
GG
button to select the ext. in
subwoofer channel level playback, then press the
ENTER or CURSOR
HH
button if you want to start the
settings over from the beginning.
*Ext.In SW+15dB
+0dB +5dB +10dB +15dB
This setting assigns the digital input terminals of the AVR-1306
for the different input sources.
Setting the Digital In Assignment
1
Press the CURSOR
FF
or
GG
button to assign the
input function connected to the COAXIAL 1
input terminal, then press the ENTER or CURSOR
HH
button to switch the COAXIAL 2 input setting.
*COAX1 CD
CD AUX DVD TV VCR CDR OFF
2
Press the CURSOR
FF
or
GG
button to assign the
input function connected to the COAXIAL 2
input terminal, then press the ENTER or CURSOR
HH
button to switch the OPTICAL 1 input setting.
*COAX2 AUX
CD AUX DVD TV VCR CDR OFF
3
Press the CURSOR
FF
or
GG
button to assign the
input function connected to the OPTICAL 1
input terminal, then press the ENTER or CURSOR
HH
button to switch the OPTICAL 2 input setting.
*OPT1 DVD
CD AUX DVD TV VCR CDR OFF
4
Press the CURSOR
FF
or
GG
button to assign the
input function connected to the OPTICAL 2
input terminal, then press the ENTER or CURSOR
HH
button to switch the Auto Surround Mode
setting.
*OPT2 TV
CD AUX DVD TV VCR CDR OFF