Filter
Top Products
CyberData Corporation 930111F VoIP Loudspeaker Amplifier Operations Guide
Installing the VoIP Loudspeaker Amplifier
Upgrade the Firmware and Reboot the Loudspeaker Amplifier
26
Figure 2-17. Firmware Upgrade Page
7. Enter the IP address of your TFTP server into the TFTP Server IP parameter field.
8. Enter the firmware filename of the file to be uploaded into the New Filen
ame parameter field.
For example, kernel filename "201-image-spk-sip.bin".
9. Click Up
load File.
Note This
starts the upload process. Once the speaker has uploaded the file, the Uploading
Firmware countdown page appears, indicating that the firmware is being written to flash.
The speaker will automatically reboot when the upload is complete. When the countdown
finishes, the Firmware Upgrade page will refresh. The uploaded firmware filename should
be displayed in the system configuration (indicating successful upload and reboot).
10. Repeat steps 8 and 9 if you are uploading the Kernel and Applic
ation files.
For example, App
lication filename "201-romdisk-spk-sip.img".
Table 2-13 sh
ows the web page items on the Firmware Upgrade page.
Table 2-13. Firmware Upgrade Parameters
Web Page Item Description
System Configuration Shows the current configuration.
Bootname Shows the current boot loader filename.
Kernel Shows the current kernel filename for partition 1 and 2.