Filter
Top Products
Installing the VoIP Loudspeaker Amplifier
Configure the Loudspeaker Amplifier Parameters
VoIP Loudspeaker Amplifier Operations Guide 930111F CyberData Corporation
19
2.3.3 Set up the Loudspeaker Amplifier
1. Click the Speaker Setup button to open the Speaker Setup page. See Figure 2-14
Figure 2-14. Loudspeaker Amplifier Setup
2. On the Loud
speaker Amplifier Setup page, enter values for the parameters indicated in
Table 2-10.
Table 2-10. Loudspeaker Amplifier Setup Parameters
Web Page Item Description
Device Name Enter a descriptive name for this device (if desired).
Select Speaker Function Select SIP or MGROUPS.
Change Web Access Username Use this field to change the Web Access Username
Change Web Access Password Use this field to change the Web Access Password
Re-enter New Password Use this field to re-enter a new password
Speaker Tone Before Paging Enable/Disable the speaker tone (beep) before each page.
Speaker Tone After Initialization Enable/Disable the speaker tone (beep)
after the system
startup.