Curtis CD156 CD Player User Manual


 
4
- Press the PLAY button, all the tracks on a disc to be played in a random sequence.
NOTE - To cancel RANDOM PLAY simply press MODE button one time until the
RONDOM indicator disappears.
Program Play
1. During stop, press PROG button until " PROG " and track number flashes in Display.
2. Press or SKIP/SEARCH button to choose a track.
3. Press PROG button to program the track, up to 20 tracks can be programmed into
memory.
4. Repeat steps 2 and 3 to program tracks to start the program payback.
5. Press f PLAY/PAUSE button.
6. To erase the program, simply press the STOP button to turn the power off.
MAINTENANCE
Cleaning the Lens
If the lens becomes dusty, clean it with camera lens blower. Be careful not to scratch the
surface of the lens.
Cleaning the Cabinet
From time to time, clean the cabinet with a soft dry cloth. For more stubborn stains,
slightly moisten the cloth with water or a mild detergent solution. Never use benzene,
alcohol or other solvents as they may damage the finish of the cabinet.
Battery Safety
1. Install batteries correctly observing the (+/-) polarity signs.
2. Use only the recommended battery type or equivalent (voltage and size).
3. Always replace a complete set of batteries at the same time.
4. Do not mix batteries of different types.
5. Never mix new and used batteries in the same compartment.
6. Remove exhausted batteries immediately.
7. Remove batteries when product is not in use.
8. Do not dispose of batteries in fire as they may explode.
9. Do not recharge non-rechargeable batteries.
10. Rechargeable batteries are to be removed from the item before being charged.
11. Rechargeable batteries are only to be charged under adult supervision.
12. Do not short circuit the supply terminals.
13. Ensure batteries are stored away from metal objects as contact may cause a short
circuit.